Metal Shed Kits
Posted By Sue on July 7, 2009
Metal Shed Kits
Metal shed kits are typically easy to assemble with minimal tool requirements. If you are a little handy around the house, a metal shed is a reasonable weekend project.
Before choosing a shed size, think about the quantity and type of things you are going to store in it. For a small area something as simple as a 50 gallon deck box might do the trick. For only hand tools, a container such as this Rubbermaid vertical toll shed might suit your needs. If your outside things include a riding lawn mower, lots of pool equipment, numerous outside toys, or patio furniture, this 10 foot storage building by Suncast could do the trick.
After you have your shed size in mind, it is not a bad idea to consult local building authorities. Here in Montana there are very few in regards to a shed. But other places may require a building permit. It is better to know before hand instead of afterwards.
Also be sure that your shed site will be within your property lines. One home we owned several years ago had a garage behind the house. The gutter on the side of the garage that bordered our neighbor’s yard to the east was missing. We came to discover that the gutter actually stuck out over the property line by just a few inches. The former owner of our home had gotten into a legal situation over it. Just a few inches can make a big difference to someone else.
Another courteous to do is to ask your neighbors if the structure will bother them. Sometimes simply shifting the shed even a few feet can help keep everyone happy.
After you select your storage shed dimensions, then comes the foundation. Refer to the post, “Metal Shed Foundations” for shed site preparation.
Next is to get your shed. If purchasing a kit, be sure to read all of the directions. Pay careful attention to use all the screws, nails, and fasteners as per plans. Many times screws and nails must be purchased separately. If screwing the base of the shed to the exposed lag bolts (as mentioned in Metal Shed Foundations post), the bottom 2×4 or 2×6 of the shed will need to be measured and holes drilled in the correct places. Then nuts placed on the top of the lag bolts after the lumber is installed.
Carefully lay out all of the pieces of the shed. With a metal shed, be sure that pieces of metal for the sides are not mixed with metal for the roof. Depending on the level of erection your particular shed requires, typically the frame has to be assembled first. Then the roof and sides installed. The first metal building that I saw built had the metal roof put on first and then the metal sides. Just follow the directions and your good sense and things should go according to the plans.
After some re-reading of directions, a few lemonade breaks, and several trips to the local hardware store, you should be well on your way.
Metal sheds not only preserve your possessions, they also help to add a little more value to your home.
Fencing is another area that shouldn’t be overlooked. From chain link, to privacy, and even pool fencing, there are many attractive ways to further enhance the beauty and usability of your yard area.
Thanks for reading! Sue
Leave a Reply